Obs Electric Fan Conversion

Obs Electric Fan Conversion. This is the best chevy truck electric fan conversion kit on the market today! I left everything off, and let the new temp sensor turn the fans on, and the temp gauge stayed in the same spot as it always has.

Malibu Radiator Electric FAN Swap IH8MUD Forum from forum.ih8mud.com

It's a totally different, smaller bolt pattern than the obs clutch. Here is a pic with radiator and clutch fan removed. This is the best chevy truck electric fan conversion kit on the market today!

Source: mojelicytacje.blogspot.com

Using 2 fans 2 separate relays and 2 separate auto breakers all 40 amps I let the truck run for a little while, and the fans went off, then after about 1 or 2 mins, they kicked back on.

Source: www.powerstroke.org

This is the best chevy truck electric fan conversion kit on the market today! Only difference is the housing & blades.

Source: kristenalvarezchristi.blogspot.com

I would recommend a 70 amp+ relay to supply current to the fan motor, most aftermarket fan controllers aren't designed to handle this amperage load continuously, but can. It takes somewhere in the neighborhood of 40 hp to turn the stock fan fully engaged.

Source: santeesthetic.com

Link to the shopping list and how to pdf doc: System is cool but the vsc they send you dont is it the video explains why

Source: kristenalvarezchristi.blogspot.com

It takes somewhere in the neighborhood of 40 hp to turn the stock fan fully engaged. This kit includes a custom built aluminum shroud (specifically for radiators with a 34 core measurement), two 16 spal fans, one davies craig #0444 dual fan controller, all mounted as one unit on the shroud ready to wire into your vehicle.

Source: santeesthetic.com

Once its removed, remove the hoses on the radiator and removed the radiator. Took a few hits to knock it loose.

Source: www.gmt400.com

I would recommend a 70 amp+ relay to supply current to the fan motor, most aftermarket fan controllers aren't designed to handle this amperage load continuously, but can. Once its removed, remove the hoses on the radiator and removed the radiator.

Source: santeesthetic.com

Thee 7.3 sd plastic fan wont work on the obs fan clutch. System is cool but the vsc they send you dont is it the video explains why

Source: mojelicytacje.blogspot.com

Here is a pic with radiator and clutch fan removed. It uses 4 bolts to mount to the clutch.

Source: santeesthetic.com

Only difference is the housing & blades. Thee 7.3 sd plastic fan wont work on the obs fan clutch.

Source: kristenalvarezchristi.blogspot.com

21,197 views jan 2, 2019 in this video, i am showing you an easier way to eliminate the horrible radiator clutch fan that gm/gmc chevy uses on these engines and covert it to an electr.more. Link to the shopping list and how to pdf doc:

Source: santeesthetic.com

Only difference is the housing & blades. Using 2 fans 2 separate relays and 2 separate auto breakers all 40 amps

Now Take Off The Shroud And Get Ready To Remove The Fan.

Link to the shopping list and how to pdf doc: Here is a pic with radiator and clutch fan removed. Using 2 fans 2 separate relays and 2 separate auto breakers all 40 amps

Cadillac Eclectric Fan Kits Check The List Below For The.

Obs muscle truck electric fan install (454 ss) plus burnout 5,251 views sep 12, 2018 70 dislike share dieseldog 1988 garage 11.2k subscribers back with a new vlog. Took a few hits to knock it loose. This kit includes a custom built aluminum shroud (specifically for radiators with a 34 core measurement), two 16 spal fans, one davies craig #0444 dual fan controller, all mounted as one unit on the shroud ready to wire into your vehicle.

I Left Everything Off, And Let The New Temp Sensor Turn The Fans On, And The Temp Gauge Stayed In The Same Spot As It Always Has.

The ford radiator, fan shroud and intercooler are reused. It uses 4 bolts to mount to the clutch. I used a big crescent and a rubber mallet while a ratchet strap held the fan from spinning.

Only Difference Is The Housing & Blades.

So, you could reason that you would gain around 40 hp switching to electric. I install an electric fan in the. I let the truck run for a little while, and the fans went off, then after about 1 or 2 mins, they kicked back on.

I Used A Flex A Lite.

This is the best chevy truck electric fan conversion kit on the market today! System is cool but the vsc they send you dont is it the video explains why It takes somewhere in the neighborhood of 40 hp to turn the stock fan fully engaged.